Williams Fabrication Equipment and Tooling Online Auction

Bobcat 642B Skid Steer Loader

66in Snow Pusher 55 inch Bucket Needs battery

Trumpf pull behind generator

Trumpf pull behind generator, with Onnan generator, model #3A1 7-G(M).

Bridgeport Mill

Bridgeport Milling Machine, acu-rite computer does not work. 3 phase, 1HP. The table is 42in by 9in.

Bridgeport Mill

Bridgeport drill press with Acu-Rite digital computer system. 3 phase 230Volt, table is 4ft 9in.

Clausing 5937 Lathe

Serial #: 5306293 Foot Bed, 6-1/2 inch Swing, 1-1/4 inch BoreAct-rite Digital Readout3 Phase, 208/240/440 Volt Needs new drive...

Harig Super 612 Hydraulic Surface Grinder

6in x 12in 6.5ftx 3ft overall

Do All Band Saw

Do All Band Saw metal master, continuous sawing and filing. Table is 2ft by 2ft.

Westinghouse Air Compressor Type 3YC

3 phase 5HP 220 or 440 Volt #156637

Miller Syncrowave 250 TIG Welder - AC/DC

On rolling cart 4ft x 3ft

Manual Hydraulic press

Manual Hydraulic Press, W-70in by H-77in. Foot Base W-42.5in

Rotary punch

Wiedemann machine company, Rotary punch, 8.5in rotary diameter. Rotary punch is 17in tall. Base measurements are as follows,...

Hendley & Whittemore 5ft Sheet Metal Roller

16GA Hand roller with motor

36 inch Sheet Metal Roller

16GA

Chicago Steel Bending Brake 816 - 8ft 16GA

Overall 10.5ft x 5ft

Steel brake

Chicago Steel Bending brake, size 5ft up to 18 Gauge

Whitney 4Ton Notcher and Punch

Model 93 Punch and Model 100 Notcher. With all the Punches(1/16in to 2 inch Round, 2-1/4in and 2-3/4in), Tubing Notchers. Serial...

Niagara T-448-A Circle Cutter

Miller Syncrowave 250 TIG Welder w/ Argon Tank

On stationary stand 53.5in H x 24in W x 27in D

PowerMatic Band Saw

PowerMatic Band Saw, model 87, serial# 487272. Table base 2ft by 2ft.

Miller Syncrowave 250DX TIG Welder

On stationary stand overall 4ft H x x2ft W x2ft DSingle phase 220

Miller Deltaweld 302 MIG Welder

CV/DC 3 phase On rolling stand overall 65in H x 32in W x 30in D

Ontario No.65 5 inch Vise and table

Steel frames table with wood top is approximately 74 in. L x 31.5 in. W x 31.5 in. H

Downdraft Welding Table

36in H x 57in W x 30in D

Grizzly Oscillating Spindle Sander

Model: G9922

PowR-Mate 40/20 AMP Plasma Cutter

Model: 118-001230V / Single Phase

Atlas Band Saw

Atlas Band Saw model#912 serial#024228. (CART NOT INCLUDED). Table is 14in by 14in.

PowerMatic sander

PowerMatic sander 12in wheel and 21.5in belt. 110.

Westinghouse MIG Welder

On rolling cart overall 42H x 32W x 37D50ft Power Cord3 phase, 200 AMP Welder1phase, 110V, 200 Amp feeder

Buffalo No. 16 Drill Press

Buffalo Drill press No16 speeds. Serial#50-3743, 3 phase. 22in by 23in table. 83in in height, 48in depth.3 Phase

Stone Surface Plate Table With Metal Cover

24in x 36in x 4in Plate. 25in x 37in x 38in tall with Table

Hotpoint Refrigerator/ freezer

Has top freezer Model# HTS17CBTDRWWSerial# MS857332Approximate dimensions are 28.25 in. W x 30 in. D x 64.25 in. H

Bunn VPR Coffee Pot and Sharp Microwave

Kleerflo Cleanmaster Super 90 parts washer

On wheels.Overall dimensions are 44.5 in. W x 24 in. D x 37 in. H ( with top open 59 in. H) Includes 19.5 in. L x 16 in. D side...

Skat-Blast Sandblast Cabinet

Comes with Craftsman Vacuum, CH Air Dryer

3 Whitney Punches

With extra Dies

Delta Shop Master Dust Collector

Model AP400120V 1HP Motor

Skat-Blast Sand Blast Cabinet

Cabinet itself is 38 in. W x 24 in. D x 67 in. H Dry blast system adds another 8 in. On the sideComes with air dryer

2 rolling shop carts

Red one is approximately 30 in. L x 16 in. W x 32.25 in. H (Handle is 2.25 in. From side.)Black cart is approximately 39.75 in....

3 Tables, 6 Chairs, 7 Folding Chairs

Tables are: 75in x 36in x 32in tall / 5ft x 3ft x 32in tall / 6ft x30in x 30in tall

Rolling Hydraulic Lift Table

Approximately 22.5 in. Diameter x 29.75 in. H (Extends to Approximately 47.25 in. H)

Big Joe 1056 Hydraulic Lift Truck

Serial #: 33546

4 Large C-clamps

Benchtop Beverly Shear

Model# 2B1A4 in. Cut. Stands approximately 35.5 in. H with handle up.

Spellmaco Center Punch set

1/2 to 1 inch

Oxygen/Acetylene Torch Set with Cart

Drills, Router, Dremel

Snap-On 3/4 in. Drive Socket Set

Largest socket is 2 in. Smallest is 3/32. Outside of box is not Snap-on but is included.

Geeederd Arbor Press No. 3

With Stand

Bolt Bins and contents

Small gray bin is approximately 33.5 in. W x 11.5 in. D x 10.5 in. H Blue bin is approximately 33.5 in. W x 17.5 in. D x 10.75...

Lockers, 3 Filing Cabinets

Lockers are: 36in x 19in x 6ft tall2 Cabinets are 15in x 29in 1 is 18in x 30in x 58in tallAll the paperwork and files in the...

Pipe Threading and Bending Lot

2 Pipe Wrenches, Vise, benders, Threaders, Cutter

2 Vises

1 with 4 in. jaw 1 with 6 in. jaw

3 Beavy duty tow chains

Approximately 13 ft., 17 ft and 22 ft

4 Chains

2 - 6ft New2 - 7ft

Yellow parts bins

Contents and shelves are NOT included! Bins only!Over 250 bins Sized from approximately 11.5 in. L x 4 in. W x 4 in. H to 11.75...

LB Sales Co. Cast Iron Top Rolling Table

45in x 28in x 38in tall

Keystone 4 inch Vise

6 in. Speedway dual purpose vise

6 in. Standard vise and also a pipe vise.

Monarch Engineering Vintage Hand-crank Lift

Metal rolling table approximately is 30.5 in. L x 25.5 in. W x 37.5 (at full height)

Kendall Gear Lube Can with Cart, Pump

2 Nitrogen Regulators

Nitrogen, CO2 and 1 Argon Regulators

H. Gerstner & Sons Vintage Machinist Tool Box

Includes contents. See pictures. Closed measurements are approximately 16 in. L x 8.5 in. W x 12.75 in. H

Dial Indicators, Magnetic Bases

H. Gerstner & Sons Vintage Machinist Tool

Comes with contents. See pictures. Box closed is approximately 20.25 in. L x 9.5 in. W x 12.75 in. H

Multiton Junior Machine Skates

Mitutoyo 24 in. Digimatic Caliper

Series 500-506-50Serial# 7001386

Ingersoll Rand D42IN Refrigerated Air Dryer

Rockwell Single Voltage Grinder

1/3 HP Comes with grimding wheel cleaner.It is mounted on a base that is approximately 24.5 in. W x 37 in. H

Delta Drill Press

Model# 17-965Serial# 035630 W6070Overall height is approximately 68 in.

Grizzly Belt Sander-Grinder

Model# G-12761HP motorApproximately 30 in. L x 16.5 in. W x 58 in. H

Central Pneumatic Hose reel

Auto Rewind with 25 ft hose. New in box.

Electric Lift

Was originally designed for motorcycles but is missing the hold-downs.

Big Joe Lift

Needs a Battery

HP DesignJet T120 E Printer

39in x 23in

File Cabinet

42in x 18in x 41in tall

Printers, Shredder, Monitor, Phone

Cannon MX700, Epson Stylus NX430, ZEBRA ZP450ctp label printer, phone, organizers, OfficeMax Paper Shredder

Plasma CAM Table, Hypertherm Plasma Cutter

Hypertherm Powermax 600 Plasma Cutter, Plasma Cam Model DHC Robotic TableWith Cabinet65in x 63in x 90in tall Table35in x 24in x...

Air Hose Reel, Dryer/Filter, Air Sanders

Bikini Filter, Regulator, Lubricator Combo, 2 Air Sanders, Air Hose Reel, and Extra Air Hose

Cabinets, shelves and filling cabinet

Wall- mount work station cabinet is approximately 48.5 in. W x 24.5 in. D x 36.25 in. H. Has a slide out work space in the...

Heavy shop table

2 in. webbed top that is adjustable height. Approximately 96 in. L x 28 in. W x 43.25 in. H Has side shelf that is approximately...

Walker Turner Upright Drill Press

1/3 hp motorStands 73 in. H

2 Table mount Burr machines with Crimp Dies

Johnson Bench Furnaces, Irons, Pots

Tabletop Burring machine Parts

2 Table mount Burr machines

2 Table mount Burr machines

Starrett Hole, Radius, Telescoping Gauges

Adjustable Parrelells, Center Finder.

Pexto Plate with Tools

Paslode Pneumatic Framing Nailer with Nails

Model# P350C/CNW90

Pexto 3 Foot Sheet Metal Hand Roller

Scaffolding

12 Upright Sides, 12 X Supports, 4 Platforms and Wheels

Metal Work Table

42in x 72in x 40in tall

Pexto Tin Smithing Tools

Rolling Shop Bench

61in x 37in. X 37in tall, 46in tall to top shelf

4 Four Drawer Filing Cabinets

1- approximately 18 in. W x 26.5 in. D x 52.25 in. H (with key)1- approximately 17 in. W x 25.5 in. D x 52 in. H (with key)1-...

Stroke Sander

8 Ft Capacity. In Pieces. Was completely powder Coated, In the process of being rebuilt.

Strippit Press Brake Tooling

Metal along the Wall

Not including the Shelves or the Strippit Parts. Stainless, Wire, Brass, Aluminum.

Pair of 4 Jaw Lathe Chucks